Neue GH601SS User Manual

User manualHobGH601GB

Important! Failure to ensure the correct assembly willcause leakage of gas.Important! Make sure that the gas supply pressure ofthe appliance obeys the

3. The outlet or omnipolar switch used for connectionis easily accessible with the appliance installed.The appliance is supplied with a 3 core flexibl

Possibilities for insertionKitchen unit with doorThe panel installed below the hob must be easy to re-move and let an easy access in case a technical

Burner Ø By-pass in 1/100 mm Burner Ø By-pass in 1/100 mmAuxiliary 28 Rapid 42Semi-rapid 32 Gas burners for NATURAL GAS G20 20 mbarBURNER NORMAL PO

Serial No . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Date of Purchase . . . . . . . . . . . . . . . . . . . . . . . . .

15

397320001-A-232013

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Product description _ _ _ _

• Never try to extinguish a fire with water, but switch off the appliance and thencover flame e.g. with a lid or a fire blanket.• Do not store items o

• Make sure that there is air circulation around the ap-pliance.• The information about the gas supply is on the ratingplate.• This appliance is not c

• Contact your municipal authority for information onhow to discard the appliance correctly.• Disconnect the appliance from the mains supply.• Cut off

ABCDA) Burner capB) Burner crownC) Ignition candleD) ThermocoupleWarning! Do not keep the control knob pushed formore than 15 seconds.If the burner do

Care and cleaningWarning! Refer to the Safety chapters.Warning! Deactivate the appliance and let it cooldown before you clean it. Disconnect theapplia

Problem Possible cause RemedyThe flame is blow out immediatelyafter ignition• Thermocouple is not heated suf-ficient• After lightning the flame, keept

InstallationWarning! Refer to the Safety chapters.Warning! The following instructions aboutinstallation, connection and maintenance must becarried out