GHCS601SSUser ManualENHobGB
11.Caution! Install the appliance only on aworktop with flat surface.Possibilities for insertionThe panel installed below the hob must be easy toremov
Burner overviewABDCCDABA. Burner capB. Burner crownC. Ignition candleD. ThermocoupleIgnition of the burnerAlways light the burner before you put onthe
Hints and tipsWarning! Refer to Safety chapters.CookwareCaution! Do not use cast iron pans, clayor earthenware pots, grill or toasterplates. The stain
Cleaning the hob• Remove immediately: melted plastic, plastic foil,sugar and food with sugar, otherwise, the dirt cancause damage to the hob. Take car
the Service Centre and conditions of guarantee are inthe guarantee booklet.Labels supplied with the accessories bagStick the adhesive labels as indica
Electric supply: 220-240 V ~ 50/60 Hz3 core flexible cable with non rewireable plug fitted with a 3 amp cartridge fuseAppliance catego-ry:II2H3+Gas co
Energy saving• Before use, make sure that the burners and pan supports are assembled correctly.• Use cookware with diameters applicable to the size of
17
ContentsSafety information 2Safety instructions 3Installation 5Product description 10Daily use 10Hints and tips 12Care and cleaning12Troubleshooting 1
867345553-C-382018
• Do not operate the appliance by means of an external timer or separateremote-control system.• WARNING: Unattended cooking on a hob with fat or oil c
• If the appliance is installed above drawers makesure that the space, between the bottom of theappliance and the upper drawer, is sufficient for airc
• Used oil, that can contain food remnants, can causefire at a lower temperature than oil used for the firsttime.• Do not put flammable products or it
Current Editions and the ETCI Rules for ElectricalInstallations.Provision for ventilationDetailed recommendations are contained in thefollowing Britis
4. Assemble the parts, follow the same procedurebackwards.5. Replace the rating plate (it is near the gas supplypipe) with the one for the new type of
• or E — Earth terminalBefore carrying out the connection, make sure:1. The limiter valve and the electrical system can takethe appliance load (see t
2.3.min. 55 mmmin. 650 mm560 mm20+min. 100 mm30 mm480 mm20+min. 600 mm4.50 mm400 mmIf a furniture unit is installed at adistance of 400 mm above t
Comments to this Manuals