Neue GH601SS User Manual

GH601User ManualENHobGB

LocationThe hob may be located in a kitchen, a kitchen/diner orbed sitting room (with a volume greater than 20 m³), butnot in a bathroom or shower roo

A5. If you change:• from natural gas G20 20 mbar to liquid gas,fully tighten the bypass screw in.• from liquid gas to natural gas G20 20 mbar,undo the

Replacement of the connection cableThe replacement of electric cable mustbe carried out exclusively by the serviceforce centre or by personnel with si

Technical informationHob dimensionsWidth 580 mmDepth 500 mmBypass diametersBURNER Ø BYPASS 1/100 mmRapid 42Semi-rapid 32Auxiliary 28Other technical da

BURNER NORMALPOWER kWMINIMUMPOWER kWINJECTORMARK 1/100mmNOMINAL GAS FLOW g/hG30 28-30 mbar G31 37 mbarAuxiliary 1,0 0,33 50 73 71Energy efficiencyProd

Product No... Date of Purchase...Customer Care: Please contact Electrolux MajorAppliances, Addington Way, L

867321728-A-302015

ContentsSafety information 2Safety instructions 3Product description 5Daily use 5Hints and tips 6Care and cleaning 7Troubleshooting7Installation 9Tech

• Never try to extinguish a fire with water, but switch off the appliance andthen cover flame e.g. with a lid or a fire blanket.• Do not store items o

• Make sure not to cause damage to the mains plug(if applicable) or to the mains cable. Contact ourAuthorised Service Centre or an electrician tochang

Care and cleaning• Clean regularly the appliance to prevent thedeterioration of the surface material.• Deactivate the appliance and let it cool down b

Burner overviewABDCA) Burner capB) Burner crownC) Ignition candleD) ThermocoupleIgnition of the burnerAlways light the burner before you put onthe coo

Caution! Make sure that the bottoms ofpots do not stand above the controlknob, otherwise the flame heats thecontrol knob up.Caution! Make sure that po

What to do if...Problem Possible cause RemedyThere is no spark when you try toactivate the spark generator.The hob is not connected to anelectrical su

Labels supplied with the accessories bagStick the adhesive labels as indicated below:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NO.03