Neue IDSH451W User Manual

User manualDishwasherIDSH451W

3To remove filters (B) and(C), turn the handle coun-terclockwise and remove.Pull apart filter (B) and(C). Wash the filters withwater.A4Remove filter (

Alarm code Problem• The indicator of the set programme flashes continu-ously.• The end indicator flashes 2 times intermittently.The appliance does not

Technical informationDimensions Width / Height / Depth (mm) 446 / 818 - 898 / 550Electrical connection Refer to the rating plate. Voltage 220-240 V

13

14

15

117908310-A-182013

ContentsSafety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Control panel _ _ _ _ _ _

Use• This appliance is intended to be used in householdand similar applications such as:– Staff kitchen areas in shops, offices and otherworking envir

3Indicators4Programme button.Indicators DescriptionEnd indicator.Salt indicator. This indicator is off while the programme operates.ProgrammesProgramm

How to deactivate the acoustic signals1. Press the on/off button to activate the appliance.Make sure that the appliance is in setting mode, re-fer to

Water hardnessWater softeneradjustmentGermandegrees(°dH)Frenchdegrees(°fH)mmol/l ClarkedegreesLevel< 4 < 7 < 0.7 < 512)1) Factory position

Filling the rinse aid dispenser1 2-maxMAX1234+-34 -MAX1234+-AFill the rinse aid dispens-er when the lens (A) isclear.To adjust the releasedquantity o

45If the programme has aprewash phase, put asmall quantity of deter-gent on the inner part ofthe appliance door.Using the combi detergent tabletsWhen

ener uses the correct quantity of dishwasher salt andwater.Using salt, rinse aid and detergent• Only use salt, rinse aid and detergent for dishwasher.